COMPLETE STREETS SANTA FE
upgrades of the examples

The concept of Complete Streets is an approach that integrates people and place in the planning, design, construction, operation, and maintenance of transportation networks.
Santa Fe Complete Streets web site is here. The Santa Fe program is part of a nationwide coalition.

On the national site, as well as the Santa Fe site, bike lanes are shown as protected bike lanes, that is, there is a physical barrier between the fast (buses, trucks, cars) and slow (bikes) modes of transportation.

However, when it comes to the examples drawn up for different locations in Santa Fe, no protected bike lanes can be found. For bikes, the same old solution, namely a stripe on the asphalt separating high-speed trucks and cars from bikes is shown. Although some decorative paint is better than nothing, it is very far from safe. Often you can see people biking on the sidewalk rather than in the unprotected bike lane, proof that people don't feel safe in unprotected bike lanes.

Below I propose some upgrades to the examples shown. These typically involve moving the curb-and-gutter, and paving bike paths. Clearly this is more expensive than opening a few cans of paint, but as a planning and advocacy organization, it is not appropriate to self-censor and go with the status-quo cheapest solution, and if we don't press for proper protected bike lanes or paths now, then we will never achieve the goal of a bike-friendly town.



(1) Airport Road near Meadows.
Currently proposed modifications

The car lanes are a bit narrower, and white and green paint define a bike lane. Note to the right of the bike lane is a curb, a few feet of plantings, and a sidewalk. Two bikers are shown riding side-by-side on the bike lane. Also, the curb/gutter cuts into the bike lane by more than a foot, causing a seam that presents a danger to bikers.

We know from experience that on roads like Airport, when there is a decent sidewalk available as shown here, bikers will ride on the sidewalk, rather than alongside high-speed cars and trucks. We also know that cars will frequently drift over the white line into the bike lane.

To provide a safe bike path, what you really want to do is to move the curb to the place where the white bike lane stripe is proposed, then have some dirt with grass and shrubs, and then a bike+ pedestrian path.

Ideally, the green strip should have substantial shrubs and weeds in it, visually contributing to the separation between fast and slow traffic modes, and helping to moderate speeds in the rh car lane.




(2) W Cordova Rd. between Cerrillos Rd. and Railroad Track

Currently proposed modifications

Two car lanes are reduced to one, and white and green paint define an unprotected bike lane. Note again to the right of the bike lane is a curb, and a sidewalk. Also, the curb/gutter cuts into the bike lane by more than a foot, causing a seam that presents a danger to bikers.

We know from experience that cars will frequently drift over the white line into the bike lane.

To provide a safe bike path, what you really want to do is to move the curb to the place where the white bike lane stripe is proposed. Here I show the raised bike path, and the sidewalk next to that. Ideally, you would want a planting strip, as in the example above, but it depends on available space. One could make the wide center median (which currently does not exist) narrower, and use the space gained for such a planting strip between the cars and bikes.



(3) Paseo de Peralta at Old Santa Fe Trail

Currently proposed modifications

Note two lanes are reduced to one (good!). The newly available asphalt is painted to define a bike lane. At the approach to the stoplight, the bike lane merges with the right-hand turn lane for the cars.



Instead of the paint, you want a hard barrier to make a proper protected bike lane.



(4) Rodeo Rd. at Sawmill Rd. Intersection

Currently proposed modifications

Note two lanes are reduced to one (good!). The newly available asphalt is painted to define a bike lane. You think the little girl is safe?



Instead of the paint, you want a hard barrier to make a proper protected bike lane. The bike lane is up at the same level as te sidewalk and the planting strip.
Instead of bike path - planting strip - sidewalk you could also do planting strip - bike path - sidewalk.



(4) St. Michaels Dr. at Llano St. Intersection

Currently proposed modifications

Note three lanes are reduced to two (good!). The newly available asphalt is painted to define a bike lane. At the approach to the intersection, the bike lane merges with the right-hand turn lane for the cars.



Instead of the paint, you want a hard barrier to make a proper protected bike lane. The bike lane is up at the same level as te sidewalk.





I hope you get the point: Aim high: always go for protected bike lanes and paths. If we don't we'll never get any.
Links:

Galisteo bike path pilot project. This was shown at the Dec 2023 BPAC meeting, and is on a list of MPO projects. At that meeting, Hospital Drive and Alta Vista were brought up, so here they are:
Alta Vista
Hospital Drive
Rufina Circle




Hubert van Hecke
Jan 2024